Brakes

Maintain Your Kart's Braking System

The braking system of a go-kart consists of several components that must work together to ensure effective and consistent braking. Calipers, master cylinders, brake pads, rotors, and control components must, above all, be compatible with the chassis and the braking configuration used.

Front and rear calipers, master cylinders, brake pads, rotors, rotor mounts, brake force distributors, and other brake parts: Find all the components you need to maintain, repair, or upgrade your kart’s braking system at ITAKAshop.

There are 45 products.

Showing 1-24 of 45 item(s)

Sort by:

PC0311.050

Master cylinder

€181.70

PC0351.091

Front brake pads c+ tekneex 4 pistons caliper d18

€92.30

PC0322.086

Brake distributor handle

€15.50

PC0341.235

140 mm front ventilated brake disk

€142.20

PC0351.090

Front brake pads p+ tekneex 4 pistons caliper d18

€92.30

PC0331.122

Tekneex 4 pistons front caliper d18 kz

€287.50

PC0683.012C

Brake vent

€19.60

PC0341.226

142 mm front ventilated brake disk

€74.89

PC0331.117D

Decentralized support for d20 caliper and ø192 dis

Price from €39.90

€60.95

FRONT BRAKE PADS FOR TEKNEEX 4 PISTONS CALIPER D18

PC0351.093T

Front brake pads for tekneex 4 pistons d18 - 8mm

€73.80

PC0331.121

Tekneex 4 pistons rear caliper d20

€287.50

PC0341.231

175 mm rear ventilated brake disk

€135.40

PC0351.088T

Front brake pads for tekneex 4 pistons d18 - 6mm

€73.70

PC0331.116

Tekneex 2 pistons rear caliper d24

€229.60

PC0351.086

Rear brake pads c+ tekneex 4 pistons caliper d20

€83.90

PC0331.119

Tekneex 2 pistons rear caliper d28

€229.60

PC0341.234

205 mm rear ventilated brake disk

€142.20

PC0351.085

Rear brake pads p+ tekneex 4 pistons caliper d20

€83.90

PC0341.009M

205 mm mechanical rear brake disk

Price from €62.60

€62.60

PC0351.083T

Rear brake pads for tekneex 4 pistons caliper d20

Price from €63.00

€67.00

PC0291.261

D25 aluminium disk carrier

€74.90

PC0351.074

Rear brake pads for tekneex 2 pistons caliper d24

€67.00

PC0321.00L

Open socket

Price from €5.70

€6.80

PC0291.314

D30 aluminium disk carrier

€76.80

Showing 1-24 of 45 item(s)

How does a go-kart’s braking system work?

In a hydraulic system, pressing the pedal activates the master cylinder, which transmits hydraulic pressure to the caliper. The caliper pistons then allow the brake pads to apply pressure to the brake disc in order to slow down the kart.

The configuration varies depending on the kart and the discipline being practiced: some systems operate only at the rear, while others also feature front brakes. It is therefore important to identify your exact configuration before replacing a component.

What are the main components of a go-kart’s brakes?

A disc brake system can consist of several parts: master cylinder, caliper, brake pads, rotor, rotor mount, brake fluid, and various control or mounting components.

Each component fulfills a specific function and must be compatible with the rest of the system.

How do you choose brake parts that are compatible with your kart?

Compatibility must be verified based on your chassis, your braking system, and the part numbers of the components already installed. Two parts that perform the same function are not necessarily interchangeable.

Depending on the component, be sure to check its dimensions, installation instructions, and compatible brake part numbers. For example, the ITAKAshop product sheets specify exactly which TEKNEEX systems and chassis certain three-cylinder masterscylinder or caliper models are intended.

If in doubt, refer to the exploded views and recommendations provided by your chassis manufacturer.

How do you know if your kart’s brakes need to be checked?

An unusual change in braking behavior should prompt you to have the system inspected before continuing to drive. Also, regularly inspect the condition of the brake pads and rotor, the mountings, the operation of the caliper, and the hydraulic system, if present.

Don’t wait until a problem arises to perform these checks: the braking system should be part of the regular checks performed on the kart.

When should a kart’s brake pads be replaced?

The brake pads must be inspected regularly to check their wear level and thecondition of their friction surface. Significant, uneven wear or visible damage should prompt you to check whether they need to be replaced.

Use brake pads that are specifically designed for your caliper: The ITAKAshop range includes various part numbers designed for specific calipers and piston diameters.

Why and when should you bleed a kart’s brakes?

Bleeding a hydraulic system allows, among other things, to remove air from the circuit. Since the presence ofair can impair the transmission of hydraulic pressure, so bleeding may be necessary after work on the system or when its operation requires it.

Use the brake fluid specified for your system and follow the manufacturer’s recommendations regarding the bleeding procedure and the product to use.

How do you maintain your kart’s brakes?

Regularly inspect the brake pads, rotors, calipers, fasteners, and hydraulic system. The friction surfaces of the rotors and brake pads must remain free of oil, grease, and contaminants that could impair their performance.

For cleaning, use a product specifically designed for brakes. Also check the level and condition of the brake fluid according to the manufacturer’s recommendations and bleed the system when necessary.

Can a kart’s braking be adjusted?

It depends on the braking system and the kart’s configuration. Some setups have brake adjustment or distribution devices, while others offer far fewer adjustment options.

Adjustments must be made based on the specific system and in accordance with the manufacturer’s recommendations. Avoid transferring a setting from one kart to another without verifying that their configurations are comparable.

Shopping Cart